Screws

Our extender screw is the same on all our models, so you don't have to worry which one to order based on model.  It is a M8 high tensile cap screw specifically designed to connect an extender to the main seat frame. You can also use any M8 high tensile screw from your local hardware store; as long as it is M8 high tensile around 20mm long, it will work even if it's not exactly the same style screw head!

This extender screw will fit ALL models.

Let us know if you have any questions! 

Need a new wheel screw? We have M8 high tensile cap screws, perfect for securing your new wheels to your EzyRoller.  Will fit the front and back wheels for the Classic, Drifter and Mini model only. For the Pro model screws, please look at the other listing.

Shipping is more expensive than the screw and we are really sorry about that. Good hardware stores will have M8 high tensile cap screws; as long as it is M8, it doesn't really matter if the head of the screw is not the same as ours. For the front and back wheels of the Mini and Classic, anything around 45mm should work and for Drifter back wheel, something around 60 mm will work as well. Please contact us if you have any issue.

Unit is sold singularly.

These wheel screws are designed for the pro and pro x model only.  It is a M8 high tensile cap screw specifically designed for the pro and pro x wheel models.

You can also use a M8 high tensile screw from your local hardware store; as long as it is M8 high tensile around 62mm in length; they will work even if it's not exactly the same head!

Please note: these screws will not fit the Drifter Pro X model wheels. This set does not include a spacer.  Please email us if you are after any other parts not listed.